CALL US NOW ON 1300 665 665


Managing Biting Midge.

There are over 4,000 species of family Ceratopogonidae, the family of biting midges.  Of the 11 species in South East Queensland there are five species which are major pests.  Each species has a different breeding habitat.

Culicoides subimmaculatus:  breeds in open mangrove areas.   

Culicoides marmoratus:  breeds in algae covered mud in salt marshes or below mangroves.  

Culicoides ornatus:  breeds in tidal creeks associated with the Brisbane River.  Active dawn and dusk only.

Lasiohelia townsvillensis:  traditionally breeds in rainforests, but now occur in urban situations where rainforest conditions are mimicked by well watered gardens with mulch, compost heaps etc. Generally appear after heavy rains, and early winter rain may lead to an outburst in spring.  This species is known to bite all day.

Culicoides molestus:  formerly found in estuarine areas where it was not classified as a major pest species.  Canal developments created an ideal habitat for this species.  The soft flocculated sand is an ideal place for the female to lay eggs, and the proximity of the human and dog populations provide a ready supply of blood meals.  Emergence of females begins 3 days before full or new moon, 50% emerge by the next day and emergence is completed on the day of the full or new moon.  Although the flight range is only 400 to 500 metres it has been found much further from any possible breeding place.  It has become a major pest of residents in canal estates.

Description and Life Cycle

Biting midges are very small, 1-3mm long.  Typically they are greyish, but more reddish when filled with blood.  The mouthparts consist of four minute cutting blades (that lacerate the skin inflicting sharp burning pain), enclosed in a fleshy sheath.  The eggs are roughly banana-shaped, with rounded ends and a surface variously adorned with minute projections.  They are rarely encountered in nature and are laid in batches of up to fifty in or near the larval habitat.

A tiny worm-like larva hatches and is the main feeding stage of the life cycle.  It grows from first to fourth instar, moulting each time, over a period of days, weeks or months according to species and environmental factors.  The pupal stage looks rather like a tiny legless blunt nosed lobster which breathes air through a pair of small respiratory trumpets at the head end.  It does not feed during this stage.  The adults emerge from the pupa after some days or weeks. If this is cyclical (eg related to tides) it will take place over several days with the males about a day ahead of the females.

Like mosquitoes, the female biting midge takes a blood meal to provide protein to develop her eggs. They are known as pool feeders because they use their proboscis like a saw to create a tiny hole into the skin into which a pool of blood can flow.  Saliva is injected into the pool to help the flow of blood. The direct impact on human health caused by biting midge is due to allergens in midge saliva reacting on people of varying degrees of sensitivity and immunity. Most people find the bites uncomfortable and distressing with the irritation leading to scratching and sometimes infected sores.

Biting Midge Facts

  • Biting midges are found on all continents except Antarctica.
  • Biting midges are extremely annoying but are not known to transmit disease in Australia.
  • Midge harbour (rest) in but do not breed in grass, trees or in soil or sand in the garden.
  • In overcast humid weather, they are known to bite all day and night.
  • Biting midges can detect CO2 from as far as 100 metres.  They also detect body heat and lactic acid generated during strenuous exercise.

Biting Midge Management (compiled from various South-East Queensland Local Government Brochures) What can and cannot be done to address the biting midge problem?

  • Biting midges are amongst one of the most complicated pest species to control and cannot be eradicated.
  • The larvae of midge exist in mud and sandy substrates which makes treatment near impossible whereas mosquitoes breed in water pools making their treatment simpler. 
  • There is currently no registered larvicide for biting midges, as the larvae occur in environmentally sensitive areas of the inter-tidal zone and dispersal patterns are poorly known.
  • The required larvicide dosage would also be environmentally damaging, affecting non targets. 
  • Councils treat mosquito breeding areas on public (and some private) land but do treat midge breeding areas because of the lack of environmentally safe treatments and limited effectiveness.
  • Insecticide application against adult midges is the only option available, however this method provides relatively short term relief and repeated applications are necessary. 
  • Adulticide fogging has limitations on its effectiveness as the mist/fog will only affect what it comes into contact with.
  • Research nearly a decade ago investigated the effectiveness of treating mosquito and midge harbourages in Hervey Bay and Redcliffe.  Biting midge are prone to desiccation in the heat of the day and rest in cool, shady areas such as the underside of leaves of shrubs and under stairs etc.  

Management at your property

  • If biting midges are a problem entering the house, smaller mesh size fly screens should stop entry. Screens can also be sprayed with insecticide to deter midge entering.
  • It is most likely that midge will enter dwellings on the sheltered side of the dwelling. Close windows on that side when midges are a problem.
  • Midges do not like to seek blood meals when a moderate breeze is blowing, so ceiling fans or other fans that increase air flow inside the dwelling may also decrease biting midge nuisance indoors.
  • Mosquito coils or plug in insecticide tablet burners may be useful during periods of severe midge nuisance.
  • Activities such as water hosing and digging soil attract biting midge. Avoid outdoor activities like car washing and gardening during the early morning and late afternoon when midges are most active.
  • Wear light long sleeved clothing when outdoors during midge activity periods, usually early morning and late afternoon, to minimize exposure to these insects.
  • Personal insect repellents applied to the skin and clothing as directed usually give several hours protection. Sensitive individuals or young children not wishing to use commercial repellents can try liberal applications of baby oil to exposed skin to reduce bites. An effective home repellent can be made up with equal parts of baby oil, Dettol and an aromatic oil such as citronella or lavender. Local research has shown that oil extracted from the lemon scented gum Eucalyptus citriodora is also a good midge repellent.
  • Biting midges have a histamine like substance in their saliva which can cause intense itching in sensitive individuals. To prevent acute allergic reaction and allow the body to develop its own immunity to midge bites vitamin B1 (thiamine) can be tried. This vitamin has an anti-histamine type action. Biting midge expert, Dr. Eric Reye, suggests an adult dose of 200mg twice a day with meals, preferably starting 2 weeks before exposure to midge. As immunity is developed this dose can be reduced. The development of personal immunity generally comes with a regular exposure to low numbers of midge bites, not occasional heavy exposure. Persons who have a more acute reaction to midge bites may require anti-histamine drugs at times. You should consult your family doctor before trialing these drug therapies.
  • Insect trapping devices using ultra violet light as the attractant are generally useless for decreasing biting midge numbers in suburban yards. Traps using carbon dioxide as an attractant must be well designed and operated as well as strategically placed to have any possible beneficial effect.
  • As biting midges are biologically linked with the lunar cycle, take note of the lunar period when midges are most active in your area. If for example you live in an area affected by Culicoides molestus, this species bites most actively in the few days following the full and new moon, so planning an evening barbecue around this time during the warmer months would not be wise.

Either:  Keep vegetation surrounding the house to a minimum. This reduces insect harbourage areas and increases air flow around the house. Also keep lawns well mown as any activity that reduces sheltering sites and lowers humidity surrounding the house will help to deter midges. Landscaping with tallish vegetation with an upper tree canopy is preferable to low, dense vegetation in midge prone areas as it allows a much better airflow near ground level.

Or:  Synthetic pyrethroid harbourage sprays, applied around vegetation and exterior walls may substantially reduce midge adult numbers around treated premises for many weeks.

Research around Hervey Bay and Redcliffe nearly a decade ago investigated treating mosquito and biting midge harbourages.  This treatment may reduce midge numbers for up to six weeks though not totally eliminate the pest. The pesticide is applied to shrubs, foliage, fences, house walls and screens – anywhere where midge may harbour.  Licensed pest managers treat harbourages using a product based on bifenthrin, a synthetic pyrethroid.  This chemical is indiscriminate and will kill most other insects over the six-week period that it is active. It should not be applied to plants that are in flower and attracting other insects.  Care must also be taken to ensure the spray does not drift into waterways.

The best results are obtained when neighbouring properties are also treated and a programmed treatment cycle for the ‘midge season’ is followed.


Pre Construction Termite Barriers

Pre existing slab cut out to reconfigure for new penetrations.

Pre construction termite prevention is an area we specialise in. Our Pre Construction Supervisor has 25 years of experience and knowledge in the building industry and is available to quote and consult on your requirements. We also have a dedicated Manager for Commercial and Pre Construction Projects to assist you in ensuring all works completed meet AS3660.1-2014 in accordance with AS2870-1996.

Utilising the latest technologies, products and methods to ensure your build passes certification is guaranteed when you use our professional team.

When are we needed?

This will depend on the type of foundations you are installing and it is best to email your plans through to prior to work commencing. At that time we will provide a quotation for the works and our Pre Construction Supervisor will be able to guide you best on the schedule of works.. As a general rule we will attend site before your concrete pour, after it’s boxed up but preferably before the reo mesh goes in.. though we can work around this. We are then back to site after the pour and before the framing goes on. If there is a reticulation perimeter required this will go in after the pour and be pumped off after the landscaping is finalised…. If a driveway is being added we need to come in before the driveway is poured to install a cold joint.

What products do we use?

Our installers are experienced at installing a range of products including Kordon and Term Seal. We are experienced at installing full perimeter, above slab under framing products and Penetration and Wrap products as well as reticulation systems and Block Wall solutions. All products supplied and installed by our team will have the necessary Certifications and Form 16’s provided for your Certifier.

Our dedicated team of pre construction installers are trained in a variety of products and their applications. On the job supervision and training is undertaken regularly to ensure the team are up to date with the latest information. By having this dedicated team for pre constructions work we feel that we are more able to meet the builders schedules which can sometimes be very last minute. We can provide services across the greater Brisbane region. Call our office on 1300 665 665 if you would like advice on your next project.

Pest Control Requirements for Commercial Kitchens

Commercial Kitchen

If you are setting up a Commercial Kitchen whether it be a Cafe, Restaurant, Nursing Home, Community Centre or Day Care Centre; our experienced technicians can assist you with the requirements of the Queensland Food Safety Laws/requirements.

Complying with the Federal Government Food Safety Laws, QLD government food safety laws and local council legislation is vital to ensure you don’t acquire a fine, are prosecuted or even have your business closed by the authorities due to non compliance.

If you need guidance we have a dedicated Project Manager to assist you in these matters.

Before you open your business we are happy to come in and quote on the requirements of your individual business and provide a Pest Control Program tailored to suit your business.

The service includes a Service Register which is kept on site and can be accessed by staff and management for ease of reporting and if you happen to be audited it can quickly be handed over to the auditor.

Each Service Register is personalised for your business and contains information on the areas of treatment. There are safety data sheets of the products used. Our Insurance and Indemnity information (as required by legislation) are included and we also provide a map of all Locked Bait Stations.

If needed, on request, we can also provide maintenance and hygiene reports on the current state of your kitchen.

If you’d like to arrange a free quote on your commercial pest control needs please call 1300 665 665 and we will be happy to send one of our experienced licenced technicians to assist you.

Termite Treatment

The only kind of house that should be eaten.

The treatments available for treating termites are varied and come in a variety of delivery methods from foams to dust but all must be applied by a licensed professional.

This is not the sort of thing you can look after yourself. A licensed experienced pest controller will apply the correct treatment for the species of termite you are infested with and the size of the colony and infestation you are experiencing.

If you do discover termite activity in your home the best course of action is to cover them back over and ring a professional. By subjecting them to the light you will force them to spread out looking for darkness again. This can split the colony and mean that when the treatment is applied it only kills off one section of the colony with the other half of the colony hiding safely in another location. By spraying them with any pesticide you may have on hand you are also risking a longer term problem. Although the spray may be effective in killing the termites you see it won’t knock out the whole nest.

It is our aim when called to a live termite infestation to ensure that the whole colony is killed. We don’t want anyone left behind to continue feasting on your home.

If you think you may have a problem… give us a call and we will assess the situation free of charge. You would then be advised of the cost to treat the infestation and one of our friendly staff would attend your site to treat the problem.

Call 1300 665 665 if you live in the greater Brisbane region and need a quote.


Termite and Pest Control Treatments Brisbane

Termites are an important part of the natural ecosystem but unfortunately they aren’t selective in the wood they will devour. Termites eat wood! And our homes are built using wood. Either a little or alot… but there’s wood involved in some way in nearly every home in Australia. So how do you protect your home? For dwellings that are already constructed a post construction termite barrier is highly recommended. You can use baits and monitoring stations and these can be useful in advising if there is any termite activity in your area.. but they don’t stop termites from nibbling on your roof trusses or framework.

Pre Construction Barriers are installed as part of the building process and these are now required to have your building pass code. In my next post I will explain Pre construction barriers and how they factor into your termite protection for your home.

A Post Construction Termite Barrier is a chemical barrier that encircles your property to repel subterranean termites from your property. The chemical barrier must be complete and unbroken and cover the entire perimeter of your dwelling.

Our licenced staff install this in a variety of ways depending on the construction of your building, the soil type and risk factors involved. It can include a reticulation pipe which is filled with a termiticide such as Bifenthrin or Termidor and/or trenching and chemical flooding and drilling and injecting in a solid slab. The type of installation chosen will be the most effective method to repel termites for your construction and location and could include all or only one of these methods.

When we provide a quotation for a barrier we include in our quotation a plan of the dwelling and details of what method of installation will be employed for each section of the barrier being completed.

Do you need a Barrier?

A termite barrier is a large cost, but a larger one is rebuilding your home! Ultimately the choice is yours as to whether or not you need a barrier installed at your property.

When we attend a property to do a Termite Inspection we will give you all of the information you need to make an informed decision in this regard. You are advised of the factors that increase the risk of your home being eaten by termites and the measures you can take to minimise your individual risk. In some cases a few simple measures such as fixing a leaking plumbing issue and removing dead wood from your garden can decrease your risk factors. Ultimately though a termite barrier is the only sure way to ensure your property is completely protected and does not get eaten.

How much does a Barrier Cost?

Termite Barriers are difficult to quote without an inspection of your home. There are several factors that will be judged by our technician in working out your quote. These include: 1. The type of construction of your building. 2. The foundation type. 3. Soil Type. 4. Landscaping installed. 5. Surrounding Area 5. Prevailing Weather Conditions.

It is best to get a quotation drawn up by a qualified technician after a site visit to ensure there are no nasty budget surprises after the fact. We provide a free call out to quote in these matters and our technicians are available to quote within the greater Brisbane area.. North to the Sunshine Coast, South to the Gold Coast, East to the Bay and West to Ipswich and everywhere in between.

Installing a Barrier – How long does it take?

The installation of a chemical barrier to your property can take all day. However in the case of extremely large barriers such as commercial buildings a longer time frame may be necessary. We usually book our technicians for the full day at your property to ensure the job is completed and the highest level of care and consideration is given to your barrier installation. On the day of installation we will need access to power and water but it isn’t necessary for you to be there as we are only working outside of the home. In the case of attached properties such as duplex’s though an internal access may be required. This would be outlined at the time of quoting. All barriers installed by Stevie Redback Pest Control meet the Australian Standards and where appropriate all of the necessary Form 16’s and Certificates will be issued by our office.

If you have any questions please don’t hesitate to contact our office on 1300 665 665 and one of our helpful staff will assist you with your enquiry.